Boxes.py

self-Logo

UniversalBox

Box with various options for different styles and lids

Settings for Finger Joints

angle
surroundingspacesmaximum space at the start and end in multiple of normal spaces
edge_widthspace below holes of FingerHoleEdge
fingerwidth of the fingers
playextra space to allow movement
spacespace between fingers
widthwidth of finger holes

Settings for Stackable Edges

angleinside angle of the feet
heightheight of the feet
holedistancedistance from finger holes to bottom edge
widthwidth of the feet

Settings for Hinges and HingePins

grip_percentage
outset have lid overlap at the sides (similar to OutSetEdge)
pinwidthset to lower value to get disks surrounding the pins
style "outset" or "flush"
axlediameter of the pin hole
grip_lengthfixed length of the grips on he lids
hingestrengththickness of the arc holding the pin in place

Settings for Cabinet Hinges

borediameter of the pin hole in mm
eyes_per_hingepieces per hinge
hingesnumber of hinges per edge
eyeradius of the eye (in multiples of thickness)
playspace between eyes (in multiples of thickness)
spacingminimum space around the hinge

Settings for Slide-on Lids

angle
second_pin
spring
surroundingspacesmaximum space at the start and end in multiple of normal spaces
edge_widthspace below holes of FingerHoleEdge
fingerwidth of the fingers
playextra space to allow movement
spacespace between fingers
widthwidth of finger holes

Settings for Click-on Lids

angle
bottom_radius
depth

Settings for Flex

stretchHint of how much the flex part should be shortend
connectionwidth of the gaps in the cuts
distancewidth of the pattern perpendicular to the cuts
width

UniversalBox Settings

bottom_edge edge type for bottom edge
xinner width in mm (unless outside selected)
top_edge edge type for top edge
yinner depth in mm (unless outside selected)
hinner height in mm (unless outside selected)
lid additional lid

Default Settings

thicknessthickness of the material
format format of resulting file
tabswidth of tabs holding th parts in place (not supported everywhere)
debug print surrounding boxes for some structures
referenceprint reference rectangle with given length
burnburn correction in mm (bigger values for tighter fit)